POWER CORDS
Find power cords that match your equipment, outlet, country, and application. SIGNAL+POWER stocks NEMA power cords, IEC/data center cords, splitter cords, international power cords, specialty cord options for commercial, industrial, OEM, and everyday general-purpose use.
Shop Power Cords!
- NEMA (USA) PLUG CORDS
-
POWER CORDS BY COUNTRY
-
ARGENTINA POWER CORDS
-
AUSTRALIA/NEW ZEALAND POWER CORDS
-
BRAZIL POWER CORDS
-
CHINA POWER CORDS
-
DENMARK POWER CORDS
-
EUROPE POWER CORDS
-
GULF COUNTRIES POWER CORDS
-
HONG KONG POWER CORDS
-
INDIA POWER CORDS
-
ISRAEL POWER CORDS
-
ITALY POWER CORDS
-
JAPAN POWER CORDS
-
KOREA POWER CORDS
-
MALAYSIA POWER CORDS
-
RUSSIA POWER CORDS
-
SAUDI ARABIA POWER CORDS
-
SINGAPORE POWER CORDS
-
SOUTH AFRICA POWER CORDS
-
SWITZERLAND POWER CORDS
-
TAIWAN POWER CORDS
-
THAILAND POWER CORDS
-
UNITED KINGDOM POWER CORDS
-
ARGENTINA POWER CORDS
- IEC PLUG ADAPTERS
-
PLUG ADAPTERS BY COUNTRY
- USA / CANADA / MEXICO / JAPAN / TAIWAN PLUG ADAPTERS
-
AUSTRALIA/NEW ZEALAND PLUG ADAPTERS
- BRAZIL PLUG ADAPTERS
-
CHINA PLUG ADAPTERS
- DENMARK PLUG ADAPTERS
- EUROPE / RUSSIA PLUG ADAPTERS
-
INDIA PLUG ADAPTERS
- ITALY PLUG ADAPTERS
-
JAPAN PLUG ADAPTERS
- KOREA PLUG ADAPTERS
- SOUTH AFRICA PLUG ADAPTERS
- SWITZERLAND PLUG ADAPTERS
- UK / HK / SAUDI / GULF/
- SINGAPORE / MALAYSIA PLUG ADAPTERS
- CUSTOM POWER CORDS BY COUNTRY
-
Black
-
Red
-
White
-
Blue
-
Black
-
Red
-
White
-
Blue
-
Black
-
Red
-
White
-
Blue
-
Black
-
Red
-
White
-
Blue
-
Black
-
Red
-
White
-
Blue
-
Black
-
Red
-
White
-
Blue
-
Black
-
Red
-
White
-
Blue
-
Black
-
Red
-
White
-
Blue
Choose Power Cords Built for the Way Your Equipment Is Used
Power cords look simple until the details matter.
The plug has to match the outlet. The connector has to match the equipment. The amperage and voltage rating have to suit the load. The cord must also meet the applicable certification requirements for its country of use.
That is why SIGNAL+POWER stocks a wide range of power cords across the configurations buyers actually ask for most often.
Use this collection to source:
NEMA power cords: for common USA and North American equipment, appliances, tools, displays and commercial devices.IEC/data center power cords: for servers, monitors, PDUs, networking equipment and other electronics that use compatible IEC 60320 connections.
Splitter power cords: for powering two compatible devices from one appropriately rated receptacle or power source.
International power cords: for equipment used or sold in markets outside the United States.
Extension cords: for when extra reach is needed without changing the equipment connection.
Saf-D-Grid® power cords: for compatible data center equipment using the Saf-D-Grid connector system.
IEC 60309 cords: for pin-and-sleeve power connections.
ORv3 power cords: for data center infrastructure based on the Open Compute Project's Open Rack v3 architecture.
Match the Right Power Cord to the Right Application
The best power cord is the one that fits the equipment, the environment and the standard.
For general USA equipment, a NEMA cord may be the right choice. For servers, displays and data center hardware, IEC cords are often the cleaner route. For international products, the country-specific plug standard matters just as much as the connector at the other end. For dense technical environments, splitter cords and locking options can help reduce clutter and support better power management.
Before ordering, check:
Plug typeReceptacle or connector type
Country or region of use
Voltage rating
Amperage rating
Cord length
Wire gauge
Jacket type
Approval requirements
Indoor, industrial, or data center use
If you are replacing a lost or damaged cord, match the equipment requirements first. If you are buying for a business, OEM, facility, or deployment project, think beyond the single cord and consider consistency across the full equipment setup.
Source Power Cords From a Supplier That Understands the Details
Power cord buying often becomes difficult when the product is almost right, but not quite.
The plug may look familiar, but follow a different standard. The connector may fit, but the rating may be wrong. The country may use a different outlet, voltage expectation, or approval requirement. A splitter cord may be convenient, but only if the connected load is appropriate.
SIGNAL+POWER helps remove that uncertainty by organizing power cords by category, country, plug standard, and receptacle standard. That makes it easier to move from “I need a cord” to “I need this cord for this piece of equipment.”
For straightforward purchases, shop the collection by product type or filter. For complex orders, international sourcing, OEM supply or bulk requirements, contact the team before you buy.
Frequently Asked Question
Choose the correct power cord by matching the plug type, connector type, voltage, amperage, country standard, and equipment requirement. If the cord is for business, data center, industrial or international use, check the approval requirements before ordering.
NEMA power cords are commonly used for North American wall plugs and receptacles, while IEC power cords are commonly used for equipment inlets and connectors. A single cord may use both, such as a NEMA 5-15P wall plug connected to an IEC C13 equipment connector.
Use an IEC/data center power cord when connecting servers, networking equipment, monitors, PDUs, or other electronics that use IEC connectors such as C13, C14, C19 or C20. These cords are common in IT, data center, commercial, and technical environments.
Yes, but only if the cord matches the plug standard, connector type, voltage, amperage and approval requirements for the country and equipment. Do not choose an international power cord by plug shape alone.
Splitter power cords are used to power two compatible devices from one outlet or power source. They are often used with monitors, displays, computers, and high-density technical setups, but the total connected load must stay within the ratings of the splitter cord, upstream receptacle, or PDU, as applicable.
Yes. SIGNAL+POWER identifies the power cords are RoHS and REACH compliant.
Yes. Many SIGNAL+POWER power cords are suitable for OEM and wholesale buyers, especially when a business needs a repeatable cord supply, consistent specifications, or larger order quantities.
Before ordering a replacement power cord, check the equipment label, connector shape, voltage, amperage, plug type, country of use, and cord length. If any detail is unclear, ask an expert before buying.
Yes. SIGNAL+POWER stocks power cords by country and region, including options for North America, Europe, the United Kingdom, Australia/New Zealand, China, Japan, India, South Africa and other markets.
If you cannot find the exact power cord you need, contact SIGNAL+POWER with the equipment type, plug, connector, rating, country and quantity. The team can help you find a stocked option or guide you toward a custom power cord.