Australia + NZ Power Cords
100% of our Australia power cord products are fully molded high quality cords and RoHS and REACH compliant and fully comply to the AS 3112 plug standard. We offer 15A 250V through 2.5A 250V Australia two and three prong power cords.
In Australia the electricity supplied by the normal wall inlet is called the "mains power system" and therefore Australia power cords are often referred to as Australia mains leads, Australia mains cords, Australia mains cables, Australia line cords and Australia mains power leads.
All Australia power cord plugs must contain insulated blades according to the AS3112 power cord plug specifications.
AS 3112 DEFINED: The AS 3112 Australian power cord plug standard was invented in 1938 and formally adopted in its current definition in 1990. Live and neutral pins are 17.35mm long, 6.5mm wide and 1.6mm thick and set at 30 degrees from vertical. They are insulated to 9mm from the plug face to prevent shock from partially inserted plugs. The ground prong is vertical and longer by almost 3mm than the live and neutral prongs to ensure it gets plugged in first.
Select the link below to locate the specific Australian power cord.
Not sure what plug a given country uses? You can find just about any country worldwide in our Country Plug Guide.
Traveling to Australia and need a plug adapter? Here is our most popular Australia plug adapter: Australia Plug Adapter
- 1 of 1
- Items per page:
Australia power cord plugs with Australian SAA certification and built to the AS 3112 and IEC standards.