Preloader Load
  • TOLL FREE 888.788-4884
checkmark

For quantities less than 500

buy now at stayonline.com

checkmark

For quantities greater than 500

call us at 1-888-788-4884

E-mail

Please include: Contact Information, Part Number, Quantity, and any other comments.

Share item with friends

432P6 IEC 60309 Molded Power Cord Plug (YP-432)

432P6:  32A IEC 309 four pin single phase pin and sleeve power cords with a molded low profile splashproof design.  Their hour designation is 6, their ingress protection rating is 44 and these power cords are available with rubber 6.0mm wire and are TUV approved. 

For price, availability or consultation, call 888-788-4884 or email sales@signalandpower.com .

 

 

 

  • Specifications
  • Available Wire Styles
  • Label
    Value
  • Connector Standard:
    IEC 60309 432P6
  • Number of Contacts:
    4 (3P + PE) where P = pole and PE = ground
  • Position of Earthing Contact:
    6h (hours designation)
  • Maximum Current Rating:
    32 amps
  • Rated Voltage:
    AC 380 - 415V
  • Frequency Rating:
    50/60Hz
  • Ingress Protection Rating:
    IP44
  • Number of Poles and Wires:
    3 poles, 4 wires
  • Available Wire Thickness:
    6.0mm
  • Outer Shell Color:
    red
  • Upper Housing Mold Material:
    high impact nylon (PA66 polyamide)
  • Lower Housing Mold Material:
    35P PVC (black)
  • Terminal Blade Material:
    brass
  • Flamability Rating:
    UL 94V-2
  • Temperature Rating:
    -40C through + 75C
  • Approval:
    TUV Rheinland
  • Environmental Compliance:
    RoHS, REACH
  • Testing:
    100% hi-pot (dielectric withstanding voltage), polarity and continuity

Available Wire Styles

Gauge/ # Conductors Cord Type Electrical Rating (Amps/Volts)
6.0mm² H07RN-F (rubber wire jacket) 32A/250V

 

SPDS offers a wide selection of power cords and plug adapters. We offer the finest of American engineering, quality and service combined with the best of Far East pricing and manufacturing capacity.