Certifications and Compliances
Buy Online for quantities less then 500 by clicking on the button shown above.
For quantities greater than 500 call toll free 1-888-788-4884 or email sales@signalandpower.com for volume pricing quote.Please include: Contact Information, Part Number, Quantity, and any other comments.
YP-36 (AS3112) Australia - New Zealand
AS 3112 Australia 2 prong power cord plug with SAA certification. Rated up to 10A 250V. Our AS 3112 two prong Australia power cord products are fully molded with a low profile ergonomic design and RoHS and REACH compliant.
AS 3112 is the standard plug specification used in Australia and requires that the live and neutral prongs have at least 50% from base to tip, of a non-conductive coating to help prevent shock if the plug becomes partially dislodged or not plugged in all the way. This YP-36 Australian 2 prong power plug is the most common Australia 2 prong plug in use.
Link to stocked 6' AS 3112 to C7 cord: P-ZIP-06B-AUS-I
Specifications
| Connector Standard | Australia AS/NZS 3112 2 pin plug |
| Maximum Current rating | 10A |
| Maximum Voltage | 250V |
| Number of Poles and Wires | 2 poles, 2 wires |
| Available Wire Thickness | 1.0mm˛ through 0.75mm˛ |
| Outer Mold Material | 50P PVC |
| Blade Material | Nickel coated Brass |
| Flamability Rating | UL 94V-0 |
| color | black is standard but any color available |
| Temperature Rating | minus 40C though plus 75C |
| Approvals | Australia SAA certificate# 17967 |
| Environmental Certifications | RoHS, REACH |
| Testing | Hi-Pot (Dielectric Withstanding Voltage), Polarity (pinout) and Continuity |
Available Opposite End Connectors
Available Wire Styles
| Gauge/ # Conductors
|
Cord Type
|
Electrical Rating (Amps/Volts)
|
| 0.75mm² | H03VVH2-F | 10/250 |
